In some instances, the truss system found in your building may be strong enough to support a fall protection system. By permanently attaching a D-Ring anchor to the bottom chords of an overhead truss system, we can create an OSHA-compliant anchor point that serves as part of a fall arrest system. Unlike our Connect Safe Portable Truss Anchors, the Fixed Truss Single Point Anchor is mechanically attached with steel plates and a threaded bolt and nut combination.
Installation Notes:Truss anchorage locations must be approved by a safety engineer or a qualified person and must meet all of the requirements noted in the Connect Safe Fixed Truss Anchor Instruction Manual.
Bracing shall be straight, undamaged, and meet the original design intent
The span and loading of the truss affects the allowable concentrated load that may be applied to the truss. It must be capable of withstanding a concentrated load of 900 pounds with a safety factor of two
No more than one user is permitted at a time per truss
Do not attach to a truss that is smaller than 18 inches in height
The truss must be inspected by an engineer or qualified person for structural integrity which includes but is not limited to corrosion, end connections, size, load capacity, welds, existing loading, bracing, span, or any other unsafe conditions
The LORGUARD Base is a counterweighted, OSHA-compliant guardrail base designed for quick and easy installation with LORGUARD and SafePro guardrail panels. Weighing 57 lbs., it provides excellent system stability while remaining manageable to transport. Its non-penetrating design is compatible with all roofing materials.
Trauma straps are a short-term solution alleviates effects of suspension trauma when a fall occurs. The worker becomes suspended in their harness, remaining vertical and sedentary for a long period of time. This causes blood to pool in leg veins, restricts flow to the brain and other major organs which may cause unconsciousness. This device attaches to any brand full-body fall protection harness; By utilizing one trauma strap for each leg/foot, the worker is more comfortable until rescue is completed.
The Latchways Standard Self-Retracting Lanyard range offers a dependable means of fall protection and has been specifically designed for use in a number of different environments enabling an unhindered hands-free fall protection solution. Utilizing modern engineering and innovative design, they are the most advanced self-retracting lanyards on the market.
Completely field serviceable
Frictionless Constant Force® braking mechanism
ATEX assessed
Impact resistant housing
100% Full Contact™ locking mechanism
Stainless steel chassis & components
Portable Truss Anchors are the easy, cost-effective alternative to permanent single-point anchors. They connect to your existing overhead truss system without requiring penetrating installation and install in minutes.
• OSHA 1926.502 and ANSI Z359.1 compliant• Fast and easy installation• 310 lb. single user rating• Compatible with K, KCS, LH, and DHL truss systems
The Portable Truss Anchor Kit is a bundle that includes everything you'll need to have a safe overhead system, and includes:
Portable Truss Anchor
Extension Pole
4" Steel Ring
Grab Hook
3M Self-Retracting Lifeline
Safety Harness
Improve employee and customer safety the smart way by utilizing the EdgeSafe® Smart Gate from PS Safety Access™ in your facility. With flexible sizing to fit virtually any situation, our Smart Gate is ideal for a variety of applications, including: loading docks, fall protection/railing openings for hoisting, machine guarding, equipment protection, ground-level traffic control, perimeter protection, and so much more!
