The 3M™ DBI-SALA® ExoFit™ range of full-body harnesses is designed to help achieve optimal fit, function and efficiency while fulfilling the safety and performance requirements for the work you do every day. As you continue to raise expectations and reach new heights, the ExoFit™ has been elevated to help climb with you. ExoFit™ harnesses continue to evolve through engineering and worksite research, complemented by advances in new materials and technologies. We are expanding your choices, and with more than 400 new harness options to choose from, 3M™ DBI-SALA® has your back and can help your team reach greater heights. Elevate your safety harness to the next generation of 3M™ DBI-SALA® ExoFit™ X100, X200, and X300 to keep your workforce comfortable in uncomfortable places.

Read more less

3M DBI SALA ExoFit X300 Comfort Construction Positioning Safety Harness The 3M™ DBI-SALA® ExoFit™ X300 is designed for those who refuse to compromise. The X300 harnesses are outfitted with high-quality components that have been developed to enhance the safety, convenience and performance for working at height on your job site. The X300 comfort harness is built with 6,000lb polyester webbing, robust nylon/polyester hybrid comfort padding with reflective 3M Scotchlite™ panels, and lightweight aluminum hardware. New technology in the Dorsal D-ring area helps workers make efficient connections and maintain a safe harness fit. Locking torso adjustment and quick-connect buckle options are available to optimize fit and worker experience. Select configurations are also available with exclusive weight distribution system to help reduce shoulder strain and fatigue. The 3M™ DBI-SALA® ExoFit™ range of full-body harnesses is designed to help achieve optimal fit, function and efficiency while fulfilling the safety and performance requirements for the work you do every day. As you continue to raise expectations and reach new heights, the ExoFit™ has been elevated to help climb with you. ExoFit™ harnesses continue to evolve through engineering and worksite research, complemented by advances in new materials and technologies. We are expanding your choices, and with more than 400 new harness options to choose from, 3M™ DBI-SALA® has your back and can help your team reach greater heights. Meets or Exceeds ANSI Z359.11, OSHA 1910.140, OSHA 1926.502 Features: Revolving Torso Adapters adjust harness fit with ease and speed and lock webbing into place to maintain a comfortable and safe harness fit Equipped with anti-sliding dorsal D-ring pad to help greatly reduce dorsal D-ring slide Integrated easy-link SRL adapter lets you quickly and easily connect and disconnect personal SRLs Auto-locking quick connect buckles secure contact with webbing, reducing the need to readjust Automatic stand-up D-ring (lightweight aluminum) enables efficient dorsal connections Low-profile suspension trauma strap design integrated between harness webbing Equipped with auto-resetting lanyard keepers for fast and easy parking of snap hooks and carabiners 3M™ Connected Safety ID (RFID) integrated for simplified inventory, inspection, and record management Weight capacity: 420 lb. Material Specifications Chest buckle material: Aluminum alloy/Zinc plated steel D-ring material: Aluminum Leg buckle material: Aluminum alloy/Zinc plated steel Torso buckle material: Aluminum alloy/Zinc plated steel Webbing material: Polyester

Read more less

The 3M™ DBI-SALA® ExoFit™ range of full-body harnesses is designed to help achieve optimal fit, function and efficiency while fulfilling the safety and performance requirements for the work you do every day. As you continue to raise expectations and reach new heights, the ExoFit™ has been elevated to help climb with you. ExoFit™ harnesses continue to evolve through engineering and worksite research, complemented by advances in new materials and technologies. We are expanding your choices, and with more than 400 new harness options to choose from, 3M™ DBI-SALA® has your back and can help your team reach greater heights. Elevate your safety harness to the next generation of 3M™ DBI-SALA® ExoFit™ X100, X200, and X300 to keep your workforce comfortable in uncomfortable places.

Read more less

Robust galvanized temporary horizontal cable lifeline Retractable horizontal cable system can be set at any length up to 60 ft. (18.3 m) User-friendly design makes it easy to transport to and from job sites using the carrying handle. Built-in winch, pre-tension, and impact indicator Durable construction designed to help stand up to harsh conditions Single and multi-span compatible Internal energy absorber helps limit fall arrest forces Achieves proper tension with an audible click Tethered crank handle to help prevent loss 3M™ DBI-SALA® EZ-Line™ Retractable Horizontal Lifeline System is equipped with a built-in winch, tension, and impact indicators; the retractable design allows the user to quickly and efficiently set up any length of a system in moments and can be dismantled just as fast. 3M™ DBI-SALA® EZ-Line™ Retractable Horizontal Lifeline System was designed with the user in mind. Self-contained in a casing that helps eliminate large and bulky coils of cable that are difficult to set up, relocate, and store. 3M™ DBI-SALA® EZ-Line™ Retractable Horizontal Lifeline System helps provides mobility and fall protection when working at height. 3M™ DBI-SALA® EZ-Line™ Retractable Horizontal Lifeline System is ideal for protecting workers operating in the horizontal plane who may not have continuous access to alternate anchorage points.

Read more less

3M DBI SALA 1246167 Force2 Shock Absorbing 6' Lanyard The Force2™ lanyard is ideal when there is no overhead anchorage and your only option is to tie-off at your feet. It can be used for up to a 12 ft. (3.7 m) free fall, or as a standard lanyard up to a 6 ft. (1.8 m) free fall for workers that require a capacity of 311 to 420 lbs. (141-190 kg). They feature the world’s smallest and lightest shock absorber and our exclusive Hi-10™ Vectran™ energy management materials that provide second-to-none abrasion, cut and chemical resistance and efficient shock absorption. Should a fall occur, the lanyard and its unique energy absorbing system will activate stopping the fall and reducing the forces imposed on the user to safe levels. Our patented self-locking snap hooks which are widely recognized in the industry for their user friendly operation and are preferred by safety professionals and workers alike. Specifically designed to allow you to open and connect the hook without getting your thumb or fingers in the way - even with gloves on. Standards: OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req., ANSI A10.32, ANSI Z359.13 Features and Specs: 6 ft. (1.8m) single-leg lanyard Force2™ 12 ft. free fall (3.6m) and dual capacity rated Extremely compact and lightweight Exclusive Hi-10™ Vectran™ energy absorption system Abrasion resistant polyester webbing User friendly self locking snap hooks Built-in reflective materials Impact indicator Protected labels, equipped with i-Safe Capacity 130-310 lbs. (59-141kg) for 12 ft. (3.7m) Free Fall / 310-420 lbs. (141-190kg) for 6 ft. (1.8m) Free Fall

Read more less

Easy to transport. Under 30 lbs. (13.6 kg) for ease of transport and installation. Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-Ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Compliance comes standard. Meets 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27. The lighter ladder solution. 3M™ DBI-SALA® Ladder Anchor. The simple, safe way to bring your ladders into compliance is here. At under 30 lbs., (13.6 kg) this lightweight solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities, the ladder anchor can be positioned left or right, and in front or behind the ladder rungs to stay out of the way. Best of all, it’s a breeze to set up in just 5 minutes or less, with minimal parts and easy instructions. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-Ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Compliance comes standard. Meets 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.

Read more less

Easy to transport. Under 30 lbs. for ease of transport and installation Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs. Designed for durability and built to withstand permanent or temporary applications Meets requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27 Available in galvanized or stainless steel The 3M™ DBI-SALA® Fixed Ladder SRL Anchor is a simple solution to brings your ladders into compliance. At under 30 lbs., this solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities, the ladder anchor can be positioned left or right, and in front or behind the ladder rungs to stay out of the way. Lightweight for ease of transport and installation. Simple to setup up installs on the ladder in 5 minutes or less. Versatile mounting capabilities positioned left or right, and in front or behind the ladder rungs. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Meets the requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.

Read more less

Easy to transport. Under 30 lbs. for ease of transport and installation Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs. Designed for durability and built to withstand permanent or temporary applications Meets requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27 Available in galvanized or stainless steel The 3M™ DBI-SALA® Fixed Ladder SRL Anchor is a simple solution to brings your ladders into compliance. At under 30 lbs., this solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities, the ladder anchor can be positioned left or right, and in front or behind the ladder rungs to stay out of the way. Lightweight for ease of transport and installation. Simple to setup up installs on the ladder in 5 minutes or less. Versatile mounting capabilities positioned left or right, and in front or behind the ladder rungs. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Meets the requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.

Read more less

3M DBI SALA 1246161 6 ft. Web Double-leg 100% Tie-off Force2™ with Snap Hooks at Each End. The Force2™ lanyard is ideal when there is no overhead anchorage and your only option is to tie-off at your feet. It can be used for up to a 12 ft. (3.7 m) free fall, or as a standard lanyard up to a 6 ft. (1.8 m) free fall for workers that require a capacity of 311 to 420 lbs. (141-190 kg). They feature the world’s smallest and lightest shock absorber and our exclusive Hi-10™ Vectran™ energy management materials that provide second-to-none abrasion, cut and chemical resistance and efficient shock absorption. Should a fall occur, the lanyard and its unique energy absorbing system will activate stopping the fall and reducing the forces imposed on the user to safe levels. Our patented self-locking snap hooks which are widely recognized in the industry for their user friendly operation and are preferred by safety professionals and workers alike. Specifically designed to allow you to open and connect the hook without getting your thumb or fingers in the way - even with gloves on. Meets or exceeds OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req., ANSI A10.32, ANSI Z359.13 Features and specs: Capacity 130-310 lbs. (59-141kg) for 12 ft. (3.7m) Free Fall / 310-420 lbs. (141-190kg) for 6 ft. (1.8m) Free Fall 6 ft. (1.8m) double-leg 100% tie-off lanyard Force2™ 12 ft. free fall (3.6m) and dual capacity rated Extremely compact and lightweight Exclusive Hi-10™ Vectran™ energy absorption system Abrasion resistant polyester webbing User friendly self locking snap hooks Built-in reflective materials Impact indicator Protected labels, equipped with i-Safe™

Read more less

Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030) Reengineered to simplify and speed up the installation process Flexible: Mounting brackets can be used on a variety of fixed ladder styles that may consist of different rung spacings and shapes Light – weighs less than previous 3M systems Adding or upgrading your vertical safety systems just got easier. The new generation of 3M™ DBI-SALA® Lad-Saf™ Cable Vertical Safety System are re-engineered to simplify and speed up the installation process. With up to 72% fewer loose components* than some of our previous models, these lightweight systems are streamlined for easy installation and maintenance on a variety of structures — such as fixed ladders and telecommunication towers. They have also been designed to meet the requirements of the ANSI Z359.16 standard when used with our Lad-Saf X2 or X3 sleeve, helping you to stay in compliance with the current fall protection standards.

Read more less

Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030) Reengineered to simplify and speed up the installation process Flexible: Mounting brackets can be used on a variety of fixed ladder styles that may consist of different rung spacings and shapes Light – weighs less than previous 3M systems Adding or upgrading your vertical safety systems just got easier. The new generation of 3M™ DBI-SALA® Lad-Saf™ Cable Vertical Safety System are re-engineered to simplify and speed up the installation process. With up to 72% fewer loose components* than some of our previous models, these lightweight systems are streamlined for easy installation and maintenance on a variety of structures — such as fixed ladders and telecommunication towers. They have also been designed to meet the requirements of the ANSI Z359.16 standard when used with our Lad-Saf X2 or X3 sleeve, helping you to stay in compliance with the current fall protection standards.

Read more less