The 3M™ Protecta® Self-Retracting Lifeline (SRL) is durable yet lightweight and built to last while providing an economical fall protection solution without compromising performance or safety. The 3M™ Protecta® Self-Retracting Lifeline is available in multiple lifeline lengths and materials featuring a design to help ensure longevity. The 3M™ Protecta® Self-Retracting Lifeline is designed with the worker in mind, featuring a stackable housing design, with web or steel cable lifeline and a built-in swiveling anchorage point for added comfort and ease of use. 3M™ Protecta® Self-Retracting Lifelines are available in SRL, personal SRL, Leading Edge SRL, and Retrieval SRL configurations.
The 3M™ Protecta® Self-Retracting Lifeline (SRL) extends and retracts with the user as they perform their work task. Should a fall occur, a speed sensing brake system activates, stopping the fall and reducing the forces imposed on the user to safe levels. In addition, tension is always kept on the lifeline, which helps reduce dragging, snagging, trips, and falls. Whether the application requires single or twin leg configurations, mounting to an overhead anchor, or for connection directly to harness, there are several models to choose from to suit a variety of applications. 3M™ Protecta® Self-Retracting Lifeline is equipped with an integrated carrying handle to assist in transporting the SRL to job sites.
3M's anchorage connectors are built from quality materials providing high strength and durability to stand up to the toughest environments. Anchorage connectors are the foundation of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.
The 3M™ DBI-SALA® ExoFit™ range of full-body harnesses is designed to help achieve optimal fit, function and efficiency while fulfilling the safety and performance requirements for the work you do every day. As you continue to raise expectations and reach new heights, the ExoFit™ has been elevated to help climb with you. ExoFit™ harnesses continue to evolve through engineering and worksite research, complemented by advances in new materials and technologies. We are expanding your choices, and with more than 400 new harness options to choose from, 3M™ DBI-SALA® has your back and can help your team reach greater heights. Elevate your safety harness to the next generation of 3M™ DBI-SALA® ExoFit™ X100, X200, and X300 to keep your workforce comfortable in uncomfortable places.
Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030). Weight capacity 310lbs.
Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030). Weight capacity of 310lb.
Easy to transport. Under 30 lbs. for ease of transport and installation
Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments.
Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs.
Designed for durability and built to withstand permanent or temporary applications
Meets requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27
Available in galvanized or stainless steel
The 3M™ DBI-SALA® Fixed Ladder SRL Anchor is a simple solution to brings your ladders into compliance. At under 30 lbs., this solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities, the ladder anchor can be positioned left or right, and in front or behind the ladder rungs to stay out of the way. Lightweight for ease of transport and installation. Simple to setup up installs on the ladder in 5 minutes or less.
Versatile mounting capabilities positioned left or right, and in front or behind the ladder rungs. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Meets the requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.
Easy to transport. Under 30 lbs. for ease of transport and installation
Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments.
Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs.
Designed for durability and built to withstand permanent or temporary applications
Meets requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27
Available in galvanized or stainless steel
The 3M™ DBI-SALA® Fixed Ladder SRL Anchor is a simple solution to brings your ladders into compliance. At under 30 lbs., this solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities, the ladder anchor can be positioned left or right, and in front or behind the ladder rungs to stay out of the way. Lightweight for ease of transport and installation. Simple to setup up installs on the ladder in 5 minutes or less.
Versatile mounting capabilities positioned left or right, and in front or behind the ladder rungs. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Meets the requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.
Sleeve/Traveler for 3M™ DBI-SALA® Lad-Saf™ 9.5 mm. (3/8 in.) cable vertical safety system
Approved for use on galvanized or stainless steel 9.5 mm (3/8 in.) cable vertical safety system
Mobile hands-free design helps follow the user for added climbing protection
Installs and detaches anywhere along the vertical lifeline
Dual-independent locking mechanism
Laser-cut stainless steel built-in energy absorber and fall indicator
Manufactured from stainless steel which helps to resist corrosion in harsh conditions
Can be used on various installations of 3M™ DBI-SALA® Lad-Saf™ 9.5 mm. (3/8 in.) vertical cable systems
Portable and compact design allows for transportation to and from the job site
Equipped with 3M™ Connected Safety ID (CSID)
Equipped with anti-inversion features to reduce the possibility of misuse.
3M™ DBI-SALA® Lad-Saf™ X3 Detachable Cable Sleeve/Traveler attaches the user to the lifeline and follows as they ascend or descend - it features a dual independent locking system that allows constant attachment to a harness while simultaneously gliding along the lifeline. 3M™ DBI-SALA® Lad-Saf™ X3 Detachable Cable Sleeve/Traveler is compatible with a wide range of applications to meet the job requirements.
3M™ DBI-SALA® Lad-Saf™ X3 Detachable Cable Sleeve/Traveler attaches anywhere on a vertical lifeline to help keep workers secured during a climb. It features a zinc-plated steel carabiner and two-independent locking systems to help ensure optimal security in the event of a fall. 3M™ DBI-SALA® Lad-Saf™ X3 Detachable Cable Sleeve/Traveler is manufactured from stainless steel which helps to resist corrosion in harsh conditions. Designed for use on 9.5 mm (3/8 in.) vertical lifeline cables.
Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030)
Reengineered to simplify and speed up the installation process
Flexible: Mounting brackets can be used on a variety of fixed ladder styles that may consist of different rung spacings and shapes
Light – weighs less than previous 3M systems
Adding or upgrading your vertical safety systems just got easier. The new generation of 3M™ DBI-SALA® Lad-Saf™ Cable Vertical Safety System are re-engineered to simplify and speed up the installation process. With up to 72% fewer loose components* than some of our previous models, these lightweight systems are streamlined for easy installation and maintenance on a variety of structures — such as fixed ladders and telecommunication towers. They have also been designed to meet the requirements of the ANSI Z359.16 standard when used with our Lad-Saf X2 or X3 sleeve, helping you to stay in compliance with the current fall protection standards.
Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030)
Reengineered to simplify and speed up the installation process
Flexible: Mounting brackets can be used on a variety of fixed ladder styles that may consist of different rung spacings and shapes
Light – weighs less than previous 3M systems
Adding or upgrading your vertical safety systems just got easier. The new generation of 3M™ DBI-SALA® Lad-Saf™ Cable Vertical Safety System are re-engineered to simplify and speed up the installation process. With up to 72% fewer loose components* than some of our previous models, these lightweight systems are streamlined for easy installation and maintenance on a variety of structures — such as fixed ladders and telecommunication towers. They have also been designed to meet the requirements of the ANSI Z359.16 standard when used with our Lad-Saf X2 or X3 sleeve, helping you to stay in compliance with the current fall protection standards.
Lightweight thermoplastic housing with built in carrying handle
Swiveling anchorage point and carabiner included
Patent pending dual label system located within ergonomic cable bumper stop to simplify inspections and reduce the need for replacement
Swiveling snap hook with impact indicator
RFID located in cable handle
3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline are our smartest SRLs yet. From reducing nuisance lockups, to simplifying inspections, every detail of the new 3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline is designed with helping workers perform with safety and convenience
Using advanced motion capture technology, we studied the forces applied to the SRL during typical at-height tasks. This data helped us engineer a new arrest mechanism that can more easily detect the difference between a fall and normal work motion, tailoring a SRL for your work application.
