Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030). Weight capacity 310lbs.
Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030). Weight capacity of 310lb.
Easy to transport. Under 30 lbs. for ease of transport and installation
Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments.
Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs.
Designed for durability and built to withstand permanent or temporary applications
Meets requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27
Available in galvanized or stainless steel
The 3M™ DBI-SALA® Fixed Ladder SRL Anchor is a simple solution to brings your ladders into compliance. At under 30 lbs., this solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities, the ladder anchor can be positioned left or right, and in front or behind the ladder rungs to stay out of the way. Lightweight for ease of transport and installation. Simple to setup up installs on the ladder in 5 minutes or less.
Versatile mounting capabilities positioned left or right, and in front or behind the ladder rungs. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Meets the requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.
Easy to transport. Under 30 lbs. for ease of transport and installation
Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments.
Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs.
Designed for durability and built to withstand permanent or temporary applications
Meets requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27
Available in galvanized or stainless steel
The 3M™ DBI-SALA® Fixed Ladder SRL Anchor is a simple solution to brings your ladders into compliance. At under 30 lbs., this solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities, the ladder anchor can be positioned left or right, and in front or behind the ladder rungs to stay out of the way. Lightweight for ease of transport and installation. Simple to setup up installs on the ladder in 5 minutes or less.
Versatile mounting capabilities positioned left or right, and in front or behind the ladder rungs. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Meets the requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.
Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030)
Reengineered to simplify and speed up the installation process
Flexible: Mounting brackets can be used on a variety of fixed ladder styles that may consist of different rung spacings and shapes
Light – weighs less than previous 3M systems
Adding or upgrading your vertical safety systems just got easier. The new generation of 3M™ DBI-SALA® Lad-Saf™ Cable Vertical Safety System are re-engineered to simplify and speed up the installation process. With up to 72% fewer loose components* than some of our previous models, these lightweight systems are streamlined for easy installation and maintenance on a variety of structures — such as fixed ladders and telecommunication towers. They have also been designed to meet the requirements of the ANSI Z359.16 standard when used with our Lad-Saf X2 or X3 sleeve, helping you to stay in compliance with the current fall protection standards.
Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030)
Reengineered to simplify and speed up the installation process
Flexible: Mounting brackets can be used on a variety of fixed ladder styles that may consist of different rung spacings and shapes
Light – weighs less than previous 3M systems
Adding or upgrading your vertical safety systems just got easier. The new generation of 3M™ DBI-SALA® Lad-Saf™ Cable Vertical Safety System are re-engineered to simplify and speed up the installation process. With up to 72% fewer loose components* than some of our previous models, these lightweight systems are streamlined for easy installation and maintenance on a variety of structures — such as fixed ladders and telecommunication towers. They have also been designed to meet the requirements of the ANSI Z359.16 standard when used with our Lad-Saf X2 or X3 sleeve, helping you to stay in compliance with the current fall protection standards.
Lightweight thermoplastic housing with built in carrying handle
Swiveling anchorage point and carabiner included
Patent pending dual label system located within ergonomic cable bumper stop to simplify inspections and reduce the need for replacement
Swiveling snap hook with impact indicator
RFID located in cable handle
3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline are our smartest SRLs yet. From reducing nuisance lockups, to simplifying inspections, every detail of the new 3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline is designed with helping workers perform with safety and convenience
Using advanced motion capture technology, we studied the forces applied to the SRL during typical at-height tasks. This data helped us engineer a new arrest mechanism that can more easily detect the difference between a fall and normal work motion, tailoring a SRL for your work application.
Lightweight thermoplastic housing with built in carrying handle
Swiveling anchorage point and carabiner included
Patent pending dual label system located within ergonomic cable bumper stop to simplify inspections and reduce the need for replacement
Swiveling snap hook with impact indicator
RFID located in cable handle
3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline are our smartest SRLs yet. From reducing nuisance lockups, to simplifying inspections, every detail of the new 3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline is designed with helping workers perform with safety and convenience
Using advanced motion capture technology, we studied the forces applied to the SRL during typical at-height tasks. This data helped us engineer a new arrest mechanism that can more easily detect the difference between a fall and normal work motion, tailoring a SRL for your work application.
Easy to transport. Under 30 lbs. (13.6 kg) for ease of transport and installation.
Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments.
Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-Ring, which can reduce overall implementation costs.
Designed for durability. Built to withstand permanent or temporary applications.
Compliance comes standard. Meets 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.
The lighter ladder solution. 3M™ DBI-SALA® Ladder Anchor. The simple, safe way to bring your ladders into compliance is here. At under 30 lbs., (13.6 kg) this lightweight solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities, the ladder anchor can be positioned left or right, and in front or behind the ladder rungs to stay out of the way. Best of all, it’s a breeze to set up in just 5 minutes or less, with minimal parts and easy instructions.
Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-Ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Compliance comes standard. Meets 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.
MSA FP Pro Rope Grab withSure-Stop Lanyard is built to be used together as a system. The rope grabs are designed as a means of fall arrest between your compatible full-body harness and a suitable fall arrest anchorage. Some applications for the MSA FP Pro Rope Grab with Sure-Stop Lanyard include roofing, ladder climbing, general construction, and tower climbing.
Features:
Stainless steel fall arrester
Built for compatibility as a system
2 and 3-foot options
Rope Compatibility: 5/8" (16mm) synthetic rope, can be 3-Strand Rope
Specifications:
EN 353-2 Certified
ANSI Z359.1-2007
3M DBI SALA 1246161 6 ft. Web Double-leg 100% Tie-off Force2™ with Snap Hooks at Each End.
The Force2™ lanyard is ideal when there is no overhead anchorage and your only option is to tie-off at your feet. It can be used for up to a 12 ft. (3.7 m) free fall, or as a standard lanyard up to a 6 ft. (1.8 m) free fall for workers that require a capacity of 311 to 420 lbs. (141-190 kg). They feature the world’s smallest and lightest shock absorber and our exclusive Hi-10™ Vectran™ energy management materials that provide second-to-none abrasion, cut and chemical resistance and efficient shock absorption. Should a fall occur, the lanyard and its unique energy absorbing system will activate stopping the fall and reducing the forces imposed on the user to safe levels. Our patented self-locking snap hooks which are widely recognized in the industry for their user friendly operation and are preferred by safety professionals and workers alike. Specifically designed to allow you to open and connect the hook without getting your thumb or fingers in the way - even with gloves on.
Meets or exceeds OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req., ANSI A10.32, ANSI Z359.13
Features and specs:
Capacity 130-310 lbs. (59-141kg) for 12 ft. (3.7m) Free Fall / 310-420 lbs. (141-190kg) for 6 ft. (1.8m) Free Fall
6 ft. (1.8m) double-leg 100% tie-off lanyard
Force2™ 12 ft. free fall (3.6m) and dual capacity rated
Extremely compact and lightweight
Exclusive Hi-10™ Vectran™ energy absorption system
Abrasion resistant polyester webbing
User friendly self locking snap hooks
Built-in reflective materials
Impact indicator
Protected labels, equipped with i-Safe™
