Reduce the risk and liability associated with unauthorized ladder use with the lightest, longest-lasting, easiest-installing ladder guard on the market. Made in the USA of 5052 aluminum, the EZ Ladder Guard is designed to eliminate pinch points associated with hinged, enclosure-style ladder guards. EZ Ladder Guard is durable, weatherproof and compatible for use with all ladder lifeline systems.
Simply hook over a rung and securely lock in place for restricted access.
The EZ Ladder Guard is available in two widths. The standard 15" width is compatible with most commercially available permanent ladders. The 18" width is designed to be used especially with the Diversified EZ Ladder.
FL-LGEXIST-02Material: 5052 AluminumDimensions: 78”height x 15” wide x .125” thickWeight: 16 lbs
FL-LGDFP-02 (designed for use with the DFP EZ Ladder)Material: 5052 AluminumDimensions: 78”height x 18” wide x .125” thickWeight: 18 lbs
Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030). Weight capacity 310lbs.
Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030). Weight capacity of 310lb.
Easy to transport. Under 30 lbs. for ease of transport and installation
Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments.
Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs.
Designed for durability and built to withstand permanent or temporary applications
Meets requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27
Available in galvanized or stainless steel
The 3M™ DBI-SALA® Fixed Ladder SRL Anchor is a simple solution to brings your ladders into compliance. At under 30 lbs., this solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities, the ladder anchor can be positioned left or right, and in front or behind the ladder rungs to stay out of the way. Lightweight for ease of transport and installation. Simple to setup up installs on the ladder in 5 minutes or less.
Versatile mounting capabilities positioned left or right, and in front or behind the ladder rungs. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Meets the requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.
Easy to transport. Under 30 lbs. for ease of transport and installation
Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments.
Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs.
Designed for durability and built to withstand permanent or temporary applications
Meets requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27
Available in galvanized or stainless steel
The 3M™ DBI-SALA® Fixed Ladder SRL Anchor is a simple solution to brings your ladders into compliance. At under 30 lbs., this solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities, the ladder anchor can be positioned left or right, and in front or behind the ladder rungs to stay out of the way. Lightweight for ease of transport and installation. Simple to setup up installs on the ladder in 5 minutes or less.
Versatile mounting capabilities positioned left or right, and in front or behind the ladder rungs. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Meets the requirements of 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.
Sleeve/Traveler for 3M™ DBI-SALA® Lad-Saf™ 9.5 mm. (3/8 in.) cable vertical safety system
Approved for use on galvanized or stainless steel 9.5 mm (3/8 in.) cable vertical safety system
Mobile hands-free design helps follow the user for added climbing protection
Installs and detaches anywhere along the vertical lifeline
Dual-independent locking mechanism
Laser-cut stainless steel built-in energy absorber and fall indicator
Manufactured from stainless steel which helps to resist corrosion in harsh conditions
Can be used on various installations of 3M™ DBI-SALA® Lad-Saf™ 9.5 mm. (3/8 in.) vertical cable systems
Portable and compact design allows for transportation to and from the job site
Equipped with 3M™ Connected Safety ID (CSID)
Equipped with anti-inversion features to reduce the possibility of misuse.
3M™ DBI-SALA® Lad-Saf™ X3 Detachable Cable Sleeve/Traveler attaches the user to the lifeline and follows as they ascend or descend - it features a dual independent locking system that allows constant attachment to a harness while simultaneously gliding along the lifeline. 3M™ DBI-SALA® Lad-Saf™ X3 Detachable Cable Sleeve/Traveler is compatible with a wide range of applications to meet the job requirements.
3M™ DBI-SALA® Lad-Saf™ X3 Detachable Cable Sleeve/Traveler attaches anywhere on a vertical lifeline to help keep workers secured during a climb. It features a zinc-plated steel carabiner and two-independent locking systems to help ensure optimal security in the event of a fall. 3M™ DBI-SALA® Lad-Saf™ X3 Detachable Cable Sleeve/Traveler is manufactured from stainless steel which helps to resist corrosion in harsh conditions. Designed for use on 9.5 mm (3/8 in.) vertical lifeline cables.
Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030)
Reengineered to simplify and speed up the installation process
Flexible: Mounting brackets can be used on a variety of fixed ladder styles that may consist of different rung spacings and shapes
Light – weighs less than previous 3M systems
Adding or upgrading your vertical safety systems just got easier. The new generation of 3M™ DBI-SALA® Lad-Saf™ Cable Vertical Safety System are re-engineered to simplify and speed up the installation process. With up to 72% fewer loose components* than some of our previous models, these lightweight systems are streamlined for easy installation and maintenance on a variety of structures — such as fixed ladders and telecommunication towers. They have also been designed to meet the requirements of the ANSI Z359.16 standard when used with our Lad-Saf X2 or X3 sleeve, helping you to stay in compliance with the current fall protection standards.
Designed to meet the requirements of the ANSI Z359.16 standard, along with OSHA 1910.140 and 1926.502, when used with our Lad-Saf X3 Detachable Cable Sleeve (6160054) and Lad-Saf X2 Detachable Cable Sleeve (6160030)
Reengineered to simplify and speed up the installation process
Flexible: Mounting brackets can be used on a variety of fixed ladder styles that may consist of different rung spacings and shapes
Light – weighs less than previous 3M systems
Adding or upgrading your vertical safety systems just got easier. The new generation of 3M™ DBI-SALA® Lad-Saf™ Cable Vertical Safety System are re-engineered to simplify and speed up the installation process. With up to 72% fewer loose components* than some of our previous models, these lightweight systems are streamlined for easy installation and maintenance on a variety of structures — such as fixed ladders and telecommunication towers. They have also been designed to meet the requirements of the ANSI Z359.16 standard when used with our Lad-Saf X2 or X3 sleeve, helping you to stay in compliance with the current fall protection standards.
Lightweight thermoplastic housing with built in carrying handle
Swiveling anchorage point and carabiner included
Patent pending dual label system located within ergonomic cable bumper stop to simplify inspections and reduce the need for replacement
Swiveling snap hook with impact indicator
RFID located in cable handle
3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline are our smartest SRLs yet. From reducing nuisance lockups, to simplifying inspections, every detail of the new 3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline is designed with helping workers perform with safety and convenience
Using advanced motion capture technology, we studied the forces applied to the SRL during typical at-height tasks. This data helped us engineer a new arrest mechanism that can more easily detect the difference between a fall and normal work motion, tailoring a SRL for your work application.
Lightweight thermoplastic housing with built in carrying handle
Swiveling anchorage point and carabiner included
Patent pending dual label system located within ergonomic cable bumper stop to simplify inspections and reduce the need for replacement
Swiveling snap hook with impact indicator
RFID located in cable handle
3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline are our smartest SRLs yet. From reducing nuisance lockups, to simplifying inspections, every detail of the new 3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline is designed with helping workers perform with safety and convenience
Using advanced motion capture technology, we studied the forces applied to the SRL during typical at-height tasks. This data helped us engineer a new arrest mechanism that can more easily detect the difference between a fall and normal work motion, tailoring a SRL for your work application.
Easy to transport. Under 30 lbs. (13.6 kg) for ease of transport and installation.
Simple to setup up installs on the ladder in 5 minutes or less. Versatile installation allows the ladder anchor to be mounted to front or behind the ladder with left, right or center alignments.
Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-Ring, which can reduce overall implementation costs.
Designed for durability. Built to withstand permanent or temporary applications.
Compliance comes standard. Meets 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.
The lighter ladder solution. 3M™ DBI-SALA® Ladder Anchor. The simple, safe way to bring your ladders into compliance is here. At under 30 lbs., (13.6 kg) this lightweight solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities with minimal parts to install on the ladder in 5 minutes or less.
The lighter ladder solution. 3M™ DBI-SALA® Ladder Anchor. The simple, safe way to bring your ladders into compliance is here: 3M™DBI-SALA® Ladder Anchor. At under 30 lbs., (13.6 kg) this lightweight solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking working surfaces standard. Designed with versatile mounting capabilities, the ladder anchor can be positioned left or right, and in front or behind the ladder rungs to stay out of the way. Best of all, it’s a breeze to set up in just 5 minutes or less, with minimal parts and easy instructions. Lightweight for ease of transport and installation. Simple to setup up installs on the ladder in 5 minutes or less. Versatile mounting capabilities positioned left or right, and in front or behind the ladder rungs. Compatible with your existing fall protection harness. Unlike a fixed cable system, this solution doesn’t require a front D-Ring, which can reduce overall implementation costs. Designed for durability. Built to withstand permanent or temporary applications. Compliance comes standard. Meets 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.
MSA Latchways Vertical Ladder System Kits provide an easy-to-install solution when fall protection is necessary for climbing activities on fixed ladders. A vertical lifeline allows movement up and down the entire height of the line, eliminating the need to disconnect and find new tie-off points while ascending or descending a ladder. In the event of a fall, the climbing device automatically engages the vertical lifeline and locks, arresting the fall and potentially saving a life.
These vertical ladder kits come in multiple lengths for different ladder heights, can be adapted to various rung shapes and sizes and must be used in conjunction with an approved climbing device like the LadderLatch™.
The Latchways LadderLatch is SOLD SEPARATELY.
