The SafePro Ballasted Guardrail Base is an OSHA-compliant, counterweighted base that is compatible with all SafePro guardrail and warning line systems. Its patented design enables it to offer essential stability to the guardrail system, while also allowing for the stacking of bases during shipping and transportation to improve efficiency.
The SafePro Guardrail Base Pad is designed specifically to be used with SafePro Guardrail Bases, as a protective layer between the base and the membrane of the roof, protecting it against potential system movement and prolonging its life. The pad measures 21"X27"X1/2" and weighs 12 lbs.
SafePro Guardrail Panels are OSHA-compliant, non-penetrating rooftop guardrail systems, ideal for construction, temporary, or long-term rooftop applications.
Available in 6', 8', and 10' sections, these panels can be combined with the SafePro Ballasted Guardrail Base for a simple-to-install safety solution to meet OSHA fall protection regulations.
SafePro's Roof Guardrail Systems
Compliant with OSHA 1910 and 1926, and meets the ASCE7-10 design wind load.
Available in safety yellow powder coat and hot dip galvanized finish.
Simple set up makes installation quick and easy.
Passive safety systems such as guardrail protect workers and maintain compliance, without the need for specialized training, regular inspections, testing, and certifications, which are required for active safety systems, such as fall arrest systems.
SafePro rooftop guardrail's non-penetrating design is ideal for protecting roof surfaces and preventing penetrations.
SafePro's 85 lb guardrail bases feature an industry-leading stackable design, making the storage of guardrail systems when not in use more simple and efficient.
Applications
This safety guardrail is ideal for protecting roof edges, skylights, and roof hatches, but can also be used on ground level for crowd or traffic control at outdoor events, sporting events, or indoors.
A roof guardrail system is one of the most effective ways to provide passive fall protection for workers who access rooftops, roof edges, mechanical equipment, hatches, and other elevated work areas. Because guardrail systems create a physical barrier between workers and fall hazards, they can help reduce reliance on personal fall arrest equipment in many rooftop applications.
SafePro rooftop guardrail systems are designed for facilities, contractors, and safety managers who need a reliable OSHA guardrail solution that is easy to deploy and simple to reconfigure. The non-penetrating, ballasted design allows the system to be installed without drilling into the roof membrane, helping preserve roof integrity while improving rooftop safety.
For jobsites and facilities that need temporary or permanent rooftop guardrail systems, SafePro Guardrail Panels offer a practical solution for OSHA fall protection compliance. Whether used around leading edges, access points, skylights, roof hatches, or rooftop equipment, these modular guardrail panels help create a safer working environment with minimal setup time.
SafePro's Roof Hatch Safety Rails are a patented, 100% steel design that protects all four sides of an open roof hatch scuttle. The unique and innovative system comes with a 2 year warranty and installs in minutes with only 4 rail pieces and 10 bolts. The self-closing gate doubles as two additional ladder rungs, giving individuals 3 points of contact at all times as they exit the hatch. This system is the safest, easiest to install and most durable on the market.
SafePro Roof Hatch Guardrails provide:
Immediate OSHA & Cal/OSHA compliance
Decreased risk and improved safety
Self-closing /climb-assist gate (two additional ladder rungs built into gate)
Rigid 360° 100% steel rails
No risk to existing roof warranty (does not penetrate flashing)
Ergonomic, patented design
Simple to install with any size hatch (4 rail pieces)
2 year warranty (yellow powder coated finish)
Custom colors available (standard is yellow powder-coated steel)
U.S. patent number 8,726,577
The FallGuard® Model A-SM1 is a dome skylight safety screen designed to help protect workers from falls through acrylic dome skylights and roof openings. Built specifically for rooftop fall protection applications, this skylight guard provides a cost-effective safety solution for commercial, industrial, and institutional facilities that need to reduce fall hazards around existing dome skylights.
Falls through skylights remain a serious risk on rooftops, especially when workers are performing maintenance, inspections, HVAC service, repairs, solar installation, or general roof access. The FallGuard® A-SM1 helps address OSHA skylight fall protection requirements by creating a protective screen barrier over dome skylights, helping prevent accidental falls through fragile or non-rated skylight materials.
Key Benefits
Designed for fall protection around acrylic dome skylights
Helps support OSHA rooftop safety and skylight guarding requirements
Cost-effective alternative to replacing existing skylights
Easy to install on compatible dome skylight applications
Provides passive fall protection with no worker tie-off required
Helps protect maintenance crews, roofers, contractors, and facility personnel
Suitable for commercial rooftops, warehouses, manufacturing facilities, schools, hospitals, and industrial buildings
Common Applications
FallGuard® dome skylight screens are ideal for facilities with rooftop access where workers may be exposed to fall hazards near skylights, roof openings, or non-structural acrylic domes. These skylight safety screens can be used as part of a broader rooftop fall protection plan for buildings across the United States, including warehouses, distribution centers, office buildings, schools, municipalities, retail facilities, and manufacturing plants.
Improve Rooftop Safety with Passive Skylight Fall Protection
The FallGuard® Model A-SM1 provides a practical way to improve rooftop safety without relying on active fall arrest equipment. By guarding exposed dome skylights, facility owners and safety managers can help reduce fall-through hazards, improve OSHA compliance efforts, and protect workers during routine roof access.
Lightweight thermoplastic housing with built in carrying handle
Swiveling anchorage point and carabiner included
Patent pending dual label system located within ergonomic cable bumper stop to simplify inspections and reduce the need for replacement
Swiveling snap hook with impact indicator
RFID located in cable handle
3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline are our smartest SRLs yet. From reducing nuisance lockups, to simplifying inspections, every detail of the new 3M™ DBI-SALA® Smart Lock Self-Retracting Lifeline is designed with helping workers perform with safety and convenience
Using advanced motion capture technology, we studied the forces applied to the SRL during typical at-height tasks. This data helped us engineer a new arrest mechanism that can more easily detect the difference between a fall and normal work motion, tailoring a SRL for your work application.
The Staht LT is used for testing 8mm (7×7 or 1×19) cable terminations (swage) typically found on safety line systems to a maximum load of 25kN (5,620 lbf).
The manufacturer of the safety line systems will provide test guidance on the force that needs to be applied to the cable termination (swage).
Kit Contents:
300-007: Kit 3 – Staht LT Kit 1 (300-001) & 25kN Digital Tensile Tester Kit (600-044), c/w Accessories & Heavy-Duty Case.
The Staht t25 Digital Pull Tester kit provides all you need to carry out pull testing on anchors and eye safety bolts up to 25kN, helping you comply with worldwide industry standards and guidance such as: BS8539 & BS7883 NASC guidance TG4:19 AEFAC guidance TN05
Kit Contents.
25kN Load Cell, featuring Bluetooth® wireless technology.
Staht® Connect App for Android and iOS set up instructions.
Bridge (rated to 25kN), features quick release fixings for easily removing the load cell for use in other Staht products.
Drop Rod & Sealed Thrust Nut.
Jaw.
Clevis, with captive pin.
Threaded Washer Pack (M6/M8/M10/M12/M16).
Slotted Washer Pack (M6/M8/M10/M12/M16).
Anti-Rotation Pull Out Handle, fits to drop rod.
24mm Reversible Ring Ratchet Spanner with comfort handle.
Tester Lanyard (Rated to 8kg).
Wrist Tool Lanyard (Rated to 0.9kg).
USB Charging Cable.
Rugged protective case, with foam insert.
12 months calibration certificate provided.
User Instruction Manual.
The Staht t60 Digital Pull Tester is a compact, powerful and innovative machine, enabling the user to reach 60kN with ease. It provides a single solution for all typical on-site proof testing applications. The digital interface and Bluetooth ® Connectivity provide an excellent user experience and an efficient reporting workflow to improve productivity.
Kit Contents
60kN Load Cell, featuring Bluetooth® wireless technology.
Staht® Connect App for Android and iOS set up instructions.
Bridge, with leg braces (rated to 60kN), features quick release fixings for easily removing the load cell for use in other Staht products.
Drop Rod & Sealed Thrust Nut.
Jaw.
Clevis, with captive pin.
Threaded Washer Pack (M6/M8/M10/M12/M16/M20).
Slotted Washer Pack (M6/M8/M10/M12/M16).
Anti-Rotation Pull Out Handle, fits to drop rod.
24mm Reversible Ring Ratchet Spanner with comfort handle.
3/8″ Socket Wrench with 17mm Socket.
Tester Lanyard (Rated to 8kg).
Wrist Tool Lanyard (Rated to 0.9kg).
USB Charging Cable.
Rugged protective case with foam inlay.
12 months calibration certificate provided.
User Instruction Manual.
